PP Plastic Hexagonal Honeycomb Tube Settler Packing

PP plastic hexagonal honeycomb tube settler packing is mainly used for water removal in water supply and drainage projects, industrial and domestic water sedimentation, sewage sedimentation, oil separation and tailings concentration treatment, and can also be used for old pool renovation. Main features: wet circumference, small hydraulic radius, layer The flow state is good and the particle precipitation is not disturbed by the flocculated water flow.

Send Inquiry
Product Details

Product Description

Tube settler packing generally refers to hexagonal honeycomb tube settler packing.

PP plastic hexagonal honeycomb tube settler packing is mainly used for water removal in water supply and drainage projects, industrial and domestic water sedimentation, sewage sedimentation, oil separation and tailings concentration treatment, and can also be used for old pool renovation. Main features: wet circumference, small hydraulic radius, layer The flow state is good and the particle precipitation is not disturbed by the flocculated water flow.

Tube Settler Packing


Main Features of Tube Settler Packing
* The wet circumference is large and the hydraulic radius is small.
* The laminar flow state is good, and the particle sedimentation is not disturbed by turbulence.
* When the length of the honeycomb tube settler is 1 meter, the effective load is designed according to 3-5 tons/m2, and the V0 is controlled within the range of 2.5-3.0 mm/sec. The effluent quality is the best.
* The inclined tube sedimentation tank is used, the treatment capacity is 3-5 times of the advection sedimentation tank, and the clarification tank and the pulse clarification tank are accelerated 2-3 times, thus reducing the floor space.
* The amount of sludge is small, which reduces the post-treatment workload such as sludge dewatering; the resulting sludge has good sedimentation and is beneficial to the removal of suspended solids in the latter stage.


Hexagonal Honeycomb Tube Settler Packing Installation
1. Installation of mud pipe at the bottom of sedimentation tank
The installation sequence of the inclined pipe sedimentation tank generally starts from the bottom, and the installation of the bottommost mud drainage pipe system is completed first to ensure that the opening of the mud discharge pipe meets the design.
Inclined tube filler bonding
The requirements are required, fixed and fixed, and the inspection is carried out before the next installation process is allowed.

2. Complete the filler bracket installation
According to the installation drawing of the filler bracket of the inclined tube sedimentation tank, the filler bracket is first installed in place, all the welded joints are inspected firmly, the strength of the bracket is sufficient to bear the weight of the filler, and the anti-corrosion treatment is completed on the surface of the bracket.

3. Complete the inclined tube filler hot
According to the ironing method of the inclined tube packing, each inclined tube packing is packaged as a single ironing unit, and one unit is 1 m2 after the hot joining is completed, and the hot stacking is completed and stacked on the field (retaining a small amount of spare sheets for use).

4. The assembly of the inclined tube packing pool
The hot-filled packing unit is assembled from left to right in the upper part of the packing bracket. Always keep the 60° angle unchanged. Each unit should be properly pressed when assembled in sequence. If the size is not right when assembled to the rightmost side, it needs to be assembled according to the size of the loose tube filler material and assembled until all are in place.

5. The upper part of the inclined tube packing is fixed
Since the specific gravity of the inclined pipe packing is 0.92 is slightly less than water, the inclined pipe packing needs to be reinforced with 10 mm round steel from the left to the right direction in the tank after being assembled in the tank (two round steels are required for the upper part of each unit packing) The two ends of the round steel are reliably fixed on the wall of the sedimentation tank. After the round steel is installed, the loosening and floating phenomenon of the inclined tube packing may be well prevented in the initial use. The round steel is protected by epoxy coal tar pitch.

6. Operation and debugging of inclined tube sedimentation tank
* Check whether the water inlet is uniform, and may not cause impact on the sedimentation tank, affecting the sedimentation effect;
* Adjust the height and level of the water sump to the appropriate level to maintain uniform water output;
* After the above construction process, the installation of the filler in the inclined tube sedimentation tank has been completed. After normal use, it is necessary to determine the sludge discharge period according to the concentration of suspended solids in the influent water, pay attention to timely sludge discharge, and ensure that the inclined pipe sedimentation tank always maintains a good operating state and satisfactory effluent quality.


Tube Settler Packing


Honeycomb Tube Settler Packing


PP Plastic Hexagonal Honeycomb Tube Settler Packing


Hot Tags: pp plastic hexagonal honeycomb tube settler packing, China, suppliers, manufacturers, wholesale, bulk, price, for sale
Inquiry